Logic Controls Titan CR1600 Series Cash Drawer
click to see larger image

Logic Controls Titan CR1600 Series Cash Drawer

Logic Controls Titan CR1600 Series Cash Drawer
click to see larger image

Description

 
Reliable, Heavy-duty Cash Drawer
The CR1600 was built to meet the toughest requirements of retail customers. The unit uses industrial-grade ball bearing slides for smooth and long lasting operation. The CR1600 is made with heavy-gauge sheet metal and a reinforcement beam for supporting heavy top loads. The unit incorporates a high security design with all metal construction and no external screws.

Flexible Features to Meet Customers' Needs
Logic Controls designed the CR1600 with flexible features focused on the requirements of our customers. The CR1600 includes an easily accessible cable management compartment to remove the clutter and risk of pulled plugs that loose cables represent. In addition, 3 holes are provided for securing customer pole displays and peripheral cables, and these holes can be covered if not needed. The CR1600 also includes media slots and a till with adjustable bill and coin compartments that can be configured to your needs.

Supports Wide Range of Interfaces
The CR1600 cash drawer supports a wide range of interfaces: printer-driven, standard or programmable serial or USB with a virtual serial port driver. Through the use of a Logic Controls EasyConnectCable, all major brands of printers including Epson, Star, Ithaca and Citizen are supported. In addition, the CR1600 is available in port-powered models that have either a serial or USB interface and do not require power adapters or a connection to a receipt printer.
 
16" W x 20" D x 3.57" H
Heavy-gauge sheet metal with reinforcement beam for supporting heavy top loads
Industrial-grade ball bearing slides for smooth and long-lasting operation
Cable management compartment with opening door
Mounting holes for securing pole displays and peripheral cables
Wide selection of interfaces: printer-driven, standard or programmable serial
Supports all major brands of POS printers
Port-powered drawers available with serial or USB interface that do not require power adapters or connection to receipt printer
High security design with all metal construction and no external screws
Three position lock for maximum cash security
Adjustable coin compartments
Media slots
Cash drawer open/close status sensing switch
Rubber feet to prevent sliding
Available in dark gray or beige
MECHANICAL
Weight 19.8 lbs.
Dimention (in inches)
Width x Depth x Height
Bill and coin tray

16? x 20? x 3.57?
Adjustable slots

ELECTRICAL
CR1600 (control signal from POS printer)
Pulse amplitude
Pulse width
Pulse duty cycle

12 to 24 volts DC
100 to 200 milliseconds
10% max
CR1602
Pulse amplitude
Pulse width
Pulse duty cycle

12 volts DC
50u sec - 6.7 m sec
20% min.
CR1603
Pulse amplitude
Power consumption

12 volts DC
<100mA
CR1606
Power adapter input
Power adapter output
Power adapter current

120VAC; 220VAC optional
5 volts DC
300ma

INTERFACE
CR1600 (Printer Driven)
Connects to POS printer drive circuit via cable. (cable ordered seperately)
CR1602 RS232C, any protocol, bus powered
CR1603 USB Interface, bus powered
CR1606 (Smart Serial Interface)
  Serial input
    Data format
    Protocol (*default values)
      Baud Rate
      Parity
      Data Bits


RS232C

2400, 4800, 9600*, 19200
None*, Odd, Even
7, 8*

OPEN DRAWER COMMAND
CR1600 (Printer Driven) Pulse from printer drive circuit
CR1602 Any software transmitted data
CR1603 User Programmable security code (1 to 5 bytes)
CR1606 User Programmable security code (1 to 5 bytes)

NOTE
CR1600 (Printer Driven)
Logic Controls supports most POS printers. Interface cable ordered seperately. Please specify POS printer type when ordering cables.
CR1602 No power adapter required. Keys and serial interface cable supplied.
CR1603 No power adapter required. Keys and USB cable supplied.
CR1606 Power adapter, keys and serial interface cable (to computer) supplied.

CONNECTOR PINOUT
 

images_3/backtobasics8/